A Definite Guide to Troubleshoot Linksys Velop Yellow Light Issue
When you performed Linksys Velop setup in your home, did you try to learn about the meaning of the different lights on it? No? Well, you should have. They tell the status of your system. For example, if the LED on your Linksys Velop system is blinking yellow, then it indicates that there is a connectivity issue. Keeping this in mind, we have written this post. Here, we have talked about some hacks through which rectifying the Linksys Velop yellow light issue will become a piece of cake for you. Thus, read on.
Troubleshoot Linksys Velop Yellow Light Issue
1. Reposition the Nodes
The very first thing that comes to mind that can troubleshoot the Linksys Velop yellow light issue is to pull the nodes a little closer. Therefore, do the necessary. Once done, see if the LED on your device has stopped blinking yellow. If it hasn’t, then it is recommended that you follow the next troubleshooting hack.
2. Reboot Your Velop System
Rebooting or restarting your Linksys Velop system can also help you to resolve the Linksys Velop yellow light issue.
Therefore, follow the below-given instructions in order to reboot your device:
- Turn the power button off on your Velop system.
- Wait for some time.
- Thereafter, turn the power button on.
- And you are done.
In case you face issues while rebooting your Linksys Velop system, take our advice and contact our technical experts. They will help you figure out where you went wrong and how to reboot your device properly.
3. Verify the Cables
Check what your answer is to the following questions:
- Are there any cuts on the cables that you have used?
- Do you see any damage to the cables?
- Is any cable worn out?
If your answer is yes instead of no, then the time has come for you to replace the damaged cable. In case, this hack does not help you too, then you should move to the next step.
4. Perform Linksys Firmware Upgrade
Sometimes, an outdated firmware can also cause the Linksys Velop yellow light issue. To troubleshoot it, you are required to upgrade the firmware of your device to its latest version. If you do not know how to do that, then the following steps will assist you:
- Open your mobile device.
- Download the Linksys app by going to the Google or Apple Store.
- Once the installation process is complete, perform Linksys Velop login.
- Tap the Menu icon.
- You will find this option on the upper-left side of the screen.
- Tap the Network Administration option.
- Click the Firmware Update button.
- Wait for some time.
Do not unplug or restart your Linksys Velop system while the firmware is getting updated. Otherwise, the process might get disrupted and lead to more technical issues.
5. Eliminate WiFi Interference
If you haven’t tried this hack yet, then perhaps, you should do the honors now. In order to eliminate WiFi interference, all you need to do is, relocate your system and keep it away from mirrors, fish tanks, refrigerators, microwave ovens, cordless phones, washing machines, baby monitors, treadmills, televisions, Bluetooth speakers, etc.
Apart from that, maintain a safe distance between your Velop system and utensils containing water, corners, and thick concrete walls.
6. Reset the Velop System
If even after following the hacks mentioned above, you are struggling with Linksys Velop yellow light issue, then you need to perform factory default reset.
The following steps will assist you to restore your device to its default mode:
- First of all, make sure that your Linksys Velop system is plugged in properly.
- Once assured, press the Reset button after locating it.
- Wait for some time. Find that hard to do? Count from 1 to 10 then.
After the reset process has ended, you need to reconfigure your Linksys Velop system.
As you can see, there are a number of ways through which the Linksys Velop yellow light issue can be resolved. If even after following them, you are not able to turn the yellow light to green, then it is recommended that you get in touch with our technical experts.
Do not worry about the time at which you contact them as they are always on the ball to help out users who own Linksys Velop systems.