An All-Embracing Guide to Solve Linksys Velop Red Light Issue

An All-Embracing Guide to Solve Linksys Velop Red Light Issue

The color red usually signifies danger. Taking this into consideration, if the LED on your Linksys Velop router is blinking red, then it means that you are in trouble. But, worry not. The reason being, we have come up with some hacks that will help you to troubleshoot the Linksys Velop red light issue before you can even blink an eye.

But, before you learn about the ways to get rid of the issue at hand, we would like to shed light on the reasons that might have caused it in the first place.

What you need to note here is that this blog is written mainly for users who have done Linksys AC2200 setup in their homes. However, the hacks mentioned below can be applied to any other Linksys Velop model.

Why is Linksys Velop Red Light Issue Troubling You?

Here are the top reasons why the LED on your Linksys Velop router is flashing red in color:

  • Your Linksys Velop router is not connected to the modem properly.
  • The signals of your device are getting blocked by transmitting appliances.
  • An inadequate power supply can also force the LED to blink red.
  • The nodes on your router are not connected accurately.
  • You have performed Linksys AC2200 setup partially.
  • There is too much distance separating your Linksys Velop router and the modem.
Now, you need to take a step forward, follow the tips given below, and learn to fix the issue.

[Resolved] Linksys Velop Red Light Issue

1. Check the Power Supply

As mentioned above, an inadequate power supply is the mother of all reasons when it comes to experiencing technical issues. Therefore, before you do anything else, it is recommended that you check the power supply supplied to your Velop router.

If it is indeed not adequate, then you are required to plug your Linksys Velop device into a different wall socket. If this hack does not work for you, move to the next one.

2. Verify the Ethernet Connection

This hack is also applicable if you have performed Linksys AC2200 setup in your home. Have a look at the Ethernet cable holding the connection between your devices in place. Any damages found? Is it worn out?

We are hoping that none of these situations are true. On the off chance, even one of them is, swapping of your existing Ethernet cable is needed then.

3. Avoid WiFi Interference

If you are still facing the Linksys Velop red light issue, then we are not making a mistake by suggesting you get rid of WiFi interference.

To eliminate signal interference, you need to change the location of your Velop device. Make sure that while relocating it, you aren’t keeping it near any appliance, object, or surface that might mess with its WiFi signals.

If you need some examples for the same, here they are:

  • Cordless phones
  • Treadmills
  • Refrigerators
  • Baby monitors
  • Bluetooth speakers

Additionally, maintain a safe distance between your Linksys Velop router and thick walls. They are known to not just interfere with the signals of devices, but also to block them.

4. Connect the Nodes Properly

Check how accurately the nodes on your Linksys Velop device are connected. If you see that they need to get adjusted, then what are you waiting for? Do the honors now.

Once you are done following this hack, check the status of the LED on your device. Is the Linksys Velop red light issue still pushing your buttons? Go to the last and the ultimate tip.

5. Keep WiFi Devices in Proximity

Did you maintain an accurate distance between your devices while performing Linksys AC2200 setup? Too much distance between them can break the invisible bridge of communication thereby making it impossible for your devices to transmit signals.

Therefore, take our advice and consider pulling your devices close to each other. But, avoid placing them neck to neck, otherwise, something terrible will happen, i.e. the collision of their WiFi signals. You wouldn’t want that, right? So, take the necessary precaution.

Conclusion

The Linksys Velop red light issue can be a real pain in the head as it messes with the internet-usage experience of the users. We expect that the hacks given above made you take a sigh of relief by helping you fix the issue.

On the off chance, you are still finding it difficult to breathe properly, contacting our technical experts will be the right decision to take. Don’t worry about the time to ping them. Whether it is day or night, they are available 24x7 to help struggling users out there.

Disclaimer: Linksysvelop.net is an independent Support and Service provider for third-party brands, products, and services. Brand names, third-party trademarks, products, and services used here are only for informational purpose. We, hereby, disclaim any affiliation, sponsorship, or endorsement with any such third-party brand. Our services are provided only on demand/request by users or customers.