Guide to Solve Linksys Velop Port Forwarding Not Working Issue
Linksys Velop routers have a built-in firewall that stops hackers from accessing your network and the devices accessing it. Considering this, you will have to set up the router’s settings manually in order to allow the apps and the programs you want to use. The Port forwarding feature is configured via Linksys Velop router login so that data for internet apps can easily pass through the firewall of the Linksys Velop. However, at times, this feature doesn’t work for a number of users. Are you also a victim of the Linksys Velop port forwarding not working issue? Yes? Well, in that case, worry not. We can help you out. In this post, we have covered some hacks following which troubleshooting the issue at hand will become a piece of cake for you. Thus, wait no more and get down to reading.
[Fix] Linksys Velop Port Forwarding Not Working Issue
1. Restart the Linksys Device
This is the first hack that we recommend to users whenever they get their knickers in a twist because of Linksys Velop-related issues. We think that the same hack can help you out. Thus, we’ll also suggest you give your device a restart.
In order to go about the process, you are required to unplug your device from its existing power socket, let it stay idle for a few seconds, and then, plug it back from where you unplugged it. Ensure that the wall outlet is not damaged.
2. Check the Ethernet Connection
In case the previous hack did not help you out, consider checking the Ethernet cable using which you have connected your devices. Any damages found? Or cuts? Yes? Well, then you need to replace your existing cable with a new one immediately.
Once you gain access to a new cable, make sure that after connecting your devices with it, the connection is absolutely finger-tight. Want to know about an alternative to connect your devices in the future? Contact our technicians.
3. Remove WiFi Interference
Smart home appliances like cordless phones, refrigerators, treadmills, washing machines, microwave ovens, televisions, baby monitors, Bluetooth speakers, and reflexive surfaces like mirrors and fish tanks can interrupt the signals emitted from your device thereby causing the Linksys Velop port forwarding not working issue.
To take care of this little problem, you should keep WiFi interference at bay. That can be done if you change the location of your Velop device.
4. Bring the Devices Closer
Think about it, if you are not sitting with your laptop near the Linksys Velop router, it won’t receive enough WiFi signals to help you configure the port forwarding feature. Therefore, take our advice and consider sitting in the same room where you have placed your Velop device.
Although this hack will help you resolve the Linksys Velop port forwarding not working issue, on the off chance, it does not, don’t lose hope yet. We still have one more hack that can help you fix the issue at hand but also the ones that are plotting in the back end to bother you in the future.
5. Perform Factory Default Reset
This is the last hack that we were talking about. Resetting your device will restore it to its default factory mode. This means that every change you have made to your device will get erased.
Are you ready to take the risk? Good. Now, follow the instructions mentioned below and get to know how the reset process can be carried on:
- Locate the Reset button on your Linksys Velop device.
- You will soon be able to locate it. After that, press the button.
- Hold on for some time.
As soon as you are with the reset process, setup Linksys router right from scratch.
In the Nutshell
With the last hack, we are putting an end to our guide based on troubleshooting the Linksys Velop port forwarding not working issue. We expect that we were able to help you resolve it through the hacks mentioned above.
On the off chance, more help is needed, then contact our technical experts. We know what you are thinking. You are wondering at what time of the day you should contact them, right? Well, know that no matter at what hour you ping them, they will be all ears to answer your queries and resolve the issue you are experiencing.